cabin
IP56 cabin + automatic hatch
When closed, the whole machine weighs ≤50 kg, has IP56 dustproof protection, and supports lightning protection, salt spray protection, and door heating and antifreeze.
Automatic charging dock · Tower deployment
K03 Automatic Charging Dock
The whole machine is <50 kg and covers an area of about 0.36 m²; the battery capacity of 15% → 95% only takes 35 minutes . It can be installed on power towers, communication towers and smart light poles.
Used with S200 series drones, 15%→95% ≤35 minutes Built-in emergency power supply, millisecond-level switching during power outage, ≥5 hours IP56 protection, door heating and anti-freeze, supports lightning protection and salt spray protection
A dock turns inspection into a continuous operation
Footprint 0.36 m², total weight ≤50 kg, suitable for ground, rooftop, and tower mounting.
Charge 15%→95% in ≤35 min; power loss backed by emergency battery for 5 h; single dock covers 8000 m inspection radius, IP56 protection, operating -20~50°C.
0.36 m² area, can be mounted on a tower
Closed size 650×555×370 mm, lightning‑proof and salt‑spray resistant, fits on iron towers, communication towers, lamp poles.
- Overall machine weight
- ≤50 kg
- closed size
- 650×555×370 mm
- Open size
- 1380×555×370mm
- Protection level
- IP56
- Deployment scenarios: ground, rooftop, tower (power tower/communication tower/smart light pole)
- Wind resistance: 12 m/s during inspection, 8 m/s for accurate landing
Charging and protection
HP regenerates in 35 minutes, and will not be disconnected when the power is cut off
Fast charging reduces the "waiting time" to less than 35 minutes, allowing more trips a day. Mains power input of 100–240 VAC, peak power consumption ≤1000 W; when external power is interrupted, the emergency battery takes over in milliseconds, enough to last for more than 5 hours, ensuring the safe return and recovery of the drone. The cabin uses TEC refrigeration chips to control the temperature, and the cabin door is heated and anti-freeze, and can maintain temperatures from -20°C to 50°C.
- Charging time
- 15% → 95% ≤35 minutes
- emergency battery
- ≥5 hours
- Mains power input
- 100–240VAC
- Peak Power
- ≤1000W
three key parts
The cabin is responsible for protection, the weather station is responsible for judging whether it can fly, and the charging platform is responsible for replenishing the power.
weather station
Extravehicular environment monitoring
Measure the temperature, humidity, wind speed, rainfall, and lighting. If the limit is exceeded, takeoff will be stopped.
interface
Power supply and maintenance interface
Mains power 100–240 VAC input, peak value ≤1000 W; maintenance port and emergency stop reserved at the rear.
Where is K03 actually deployed?
Power grids, communication towers, campuses and city blocks - any place where "the points are fixed and need to be looked at again and again".
Smart City
Smart Campus
Power Line Inspection
Energy Inspection
Event Security
Emergency Fire Response
Pictures only represent the working environment, not specific customer projects.
Complete technical parameters
Arranged according to 2026-10 configuration; edge computing modules, etc. are optional and are confirmed according to the order.
Cabin and dimensions
| Overall machine weight | ≤50 kg |
|---|---|
| Closed dimensions (excluding weather station) | 650×555×370 mm |
| Open size (excluding weather station) | 1380×555×370mm |
| Deployment Scenarios | Ground, rooftop, tower-mounted |
| Dust protection level | IP56 |
Power supply and charging
| AC Power | 100–240 VAC, 50/60 Hz |
|---|---|
| Peak Power | ≤1000W |
| Charging Time (15% → 95%) | ≤35 minutes |
| Emergency Battery Endurance | ≥5 hours |
Working ability
| Max Inspection Range | 8000 m |
|---|---|
| Leapfrog Inspection | Supported |
| Night Precision Landing | Supported |
| External Fill Light | Supported |
| RTK Base Station | Supported |
| Data transfer rate (machine → library) | ≤200 Mbps |
| Edge Computing Module | Optional |
environment and protection
| Wind resistance (inspection process) | 12 m/s |
|---|---|
| Wind Resistant (Exact Process) | 8 m/s |
| working temperature | -20℃~50℃ |
| Working altitude | 5000 m |
| Working humidity | <95%RH |
| temperature control | TEC refrigeration plate + cabin door heating and antifreeze |
| Lightning protection/salt spray protection | All supported |
Monitoring and Platform
| Drone Presence Detection | Supported |
|---|---|
| External Monitoring | Temperature, humidity, wind speed, rainfall, light |
| Internal Monitoring | Temperature, humidity, smoke, vibration, water ingress |
| Cameras | Inside and outside the cabin |
| API | Support (MSDK/PSDK) |
| 4G communication | User-supplied SIM card |
5 Most Frequently Asked Questions Before Deployment
Short answer, no sales talk. Your question was not found, please use the form at the bottom of the page.
Can it really be installed on an iron tower?
Can. The whole machine weighs ≤50 kg and covers an area of about 0.36 m². It is designed to be used in tower-station scenarios such as power towers, communication towers and smart light poles. It is calibrated for wind resistance of 12 m/s for inspection and accurate landing of 8 m/s.
How fast does it charge?
With the S200 series, charging from 15% to 95% takes no more than 35 minutes. This time is basically a time of battery replacement and briefing, which allows the same machine to run more sorties a day.
Will the plane be locked out if the power goes out?
Won't. The dock comes with an emergency battery, which switches in milliseconds when external power is interrupted. It can last for more than 5 hours, which is enough for the drone to return, land and recover safely.
Can you connect to our own platform?
support. The dock has an open API (MSDK/PSDK), comes with 4G communication (SIM card user’s choice), and also supports Leapfrog inspection and remote route management.
What to do if it freezes or snows in winter?
The cabin door is heated and anti-freeze, and the cabin is temperature controlled with TEC refrigeration chips. The operating temperature is -20°C to 50°C, and it supports lightning protection and salt spray protection.
Let’s talk about deployment points and aircraft models
Tell us whether it should be installed on a tower or on the ground, how much area it needs to cover, and which type of machine it should be equipped with, and we will give you a deployment plan and a quotation.
Supporting models and related products
The dock needs to be equipped with a machine to form a system, and all three of them can be connected.
Supporting models
S220 industrial drone
The main supporting model of K03 has 41 minutes of flight time and 48 million dual cameras.
fixed wing
FY-VT04 vertical takeoff and landing drone
Large-scale surveying and line patrol, 240 minutes of flight time.
carry