
2812 1300KV
Equipped with 7-inch tri-blade propeller (7040), 6S power supply, direct response.

FPV ride through machine · 7 inches
A 460 g airframe that still carries 2 kg at 150 km/h — one pass along the line, one look at a site, then back home on a single battery. No second pack in the bag.
460 g airframe, 2 kg payload capacity, payload-to-weight ratio exceeding 4:1 — compact body, high payload.
2812·1300KV motor paired with 7-inch three-blade propeller, max speed 150 km/h; 5–10 km FPV video feed for real-time transmission. Mount reconnaissance equipment or small cargo and fly — airborne and operational on takeoff, reposition on landing.


T300/T700 carbon-fiber full airframe construction, 2.5 mm upper and lower plates, 5 mm arms — higher stiffness for steadier footage.
Power system
The four-in-one ESC eliminates the need for four sets of wiring and distribution boards, and the solder pads go directly towards the motor. 55A continuous current with 6S battery, the response of the 7-inch three-blade propeller (7040) is fast enough, and emergency stops and turns are not sloppy.

Motors, flight control, and image transmission are the three things that determine whether this aircraft is good at flying or not.

Equipped with 7-inch tri-blade propeller (7040), 6S power supply, direct response.

Betaflight firmware ecology, fly tower hole position M3×30.5 mm, 30.5×30.5 installation.

5.8G high-power image transmission, equipped with RHCP antenna, open area 5–10 km.
Medium and short-distance heavy object delivery, short-distance first-view inspection - one person can carry two mobile phones on his back.




Pictures only represent the working environment, not specific customer projects.
Arranged according to 2026-10 configuration; flight control and image transmission are optional items, please confirm according to the order.
| payload | 1.5–2kg |
|---|---|
| flight with payload | 10–15 minutes |
| empty flight | 25 minutes |
| maximum speed | 150 km/h |
| maximum ceiling | 6000 m |
| Image transmission distance | 5–10 km |
| structure | Mark 4 |
|---|---|
| Wheelbase | 295mm |
| Overall machine size | L220×W260×H40 mm |
| Material | Carbon fiber T300/T700 |
| Upper/lower plate thickness | 2.5/2.5mm |
| Electrical floor height | 25mm |
| Arm Thickness | 5 mm |
| Motor | 2812 · 1300KV |
|---|---|
| ESC | AM32 4-in-1 brushless 55A |
| propeller | 7-inch three-leaf (7040) |
| Recommended Battery | 6S 5000mAh · XT60 |
| Naked weight | 460g |
| Camera | 1500TVL, 1/3" CMOS |
|---|---|
| Camera power supply | DC 5–25V |
| Video Transmission | TUO FEI 2.5W (optional) |
| Antenna | 5.8GRHCP |
| Flight Controller | TUO FEI F405 (optional) |
|---|---|
| Receiver | ELRS 915MHz (CRSF) |
| Fly tower hole location | M3×30.5mm |
Short answer, no sales talk. Your question was not found, please use the form at the bottom of the page.
Payload rating is 1.5–2 kg, flight time is 10–15 minutes. 2 kg is recommended for short-distance tasks, and 1.5 kg is more comfortable for normal running.
25 minutes unloaded, 10–15 minutes loaded. This range has a lot to do with throttle habits, and aggressive flying will tend to the lower limit.
You can configure it according to your existing equipment, or you can let us configure it. Optional means that these two pieces are confirmed according to the order model, not without them.
This is top speed without load. The load will be significantly reduced, and the actual operation should be carried out with a load of 10-15 minutes in the air.
Open and unobstructed, 2.5W image transmission, equipped with original RHCP antenna. Urban buildings or valleys will shrink, so it is recommended to plan according to 5 km.
Tell us the mounting weight, one-way distance and take-off and landing site, we will match the battery and optional accessories according to the task, and then give you a delivery date.